China Testing Instruments Manufacturer,Whatsapp/Wechat:+8618620373879  Email:

MEWOI-MIX1017 Ammonia(NH3) Gas Sensor

MEWOI-MIX1017 Ammonia(NH3) Gas Sensor

2023-07-12 09:13:27  

Target Gas: Ammonia/NH3 Range :5~500ppm(NH3) Application: Domestic gas leakage detectors, Portable gas detectors

  • Main Features :
  • Serial No. :
Contact Us for QuotationEmail:464560351@qq.comWhatsapp: +8618620373879

Principle Introduction

The sensing material of MEWOI-MIX1017 is tin dioxide SnO2, which has low conductivity in clean air. When the Ammonia gas exists, the conductivity of the sensor will be raise according to the gas concentration goes up. Through a simple circuit, to convert the changes of conductivity to correspond to the gas concentration.

MEWOI-MIX1017 Ammonia(NH3) Gas Sensor has high sensitivity to ammonia. The sensor can work in high temperature. It is low cost sensor and can be used in different applications.


High sensitivity

Low power consumption

Long life and low cost

Fast response and recovery


Domestic Ammonia gas leakage detectors

Portable Ammonia gas detectors

Technical Parameters

Detecting Range5~500ppm(NH3)
Target GasAmmonia/NH3
Heater Voltage(VH)5.0V±0.1V AC or DC
Loop Voltage≤24V DC
Heater Resistor(RH)55Ω±3Ω(Room Temp.)
Power consumption(PH)≤450mW
SensitivityRS(in air)/RS(50ppm NH3)≥ 3
Output Voltage(Vs)≥0.5 V(In 50ppm NH3)
Concentration Slope≤0.6 (R200ppm/R50ppm NH3)
Testing condition20±2℃, 65%±5%RH
Oxygen concentration in used place21%, no less than 18% If used in low oxygen concentration, pleasure contact for detail Life Expectancy 5 years

QQ Chat